NETGEAR VueZone Installation Manual page 2

2
Sync cameras
Click the Sync button
on top of base station.
Blue Sync light will
turn on.
Hold camera within 12 inches of the
base station and slide power switch
ON
(green dot showing)
Blue light on camera front
will blink for 5 seconds
to confi rm sync.
NOTE: each time power is turned ON, motion detection
cameras require 1 minute for sensor to warm up and operate.
4
Start viewing!
Synced cameras will appear on the Cameras
tab on your account at my.VueZone.com.
Click on the camera or on the toolbar to
start viewing.
Aim cameras from your smartphone with VueZone Mobile.
For complete details, go to VueZone.com/mobileapps
.
3
Install cameras
Peel.
Remove strip from adhesive
backing on mount. Do not
remove if mounting on a screw.
Stick.
Press mount fi rmly on a fl at
surface or hang from a screw.
Position.
Place the camera on the
magnetic mount and aim.
Mounts for windows and tabletops/ceilings
are also available at VueZone.com
Declaration of Conformity
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/
Warning: Choking hazard with small parts.
Keep out of reach of small children.