Valcom PagePac V-5335300 Manual

®
PagePac
by
INTRODUCTION
The Trunk Adapter interfaces a loop-start trunk
port, key system line port, or stand alone tele-
phone set to page controls that do not provide a
trunk port access input.
Power Requirements
• -24VDC @ 37mA
Dimensions/Weight
• 4.0"W x 2.0"H x 1.0"D
(10.2cm x 5.1cm x 2.5cm)
• 2.0 lbs (0.9 kg)
INSTALLATION
CONNECTIONS
Trunk Adapter connections are shown in Figure 1.
Refer to the manuals supplied with each paging
system for more information. Table 1 lists the
Trunk Adapter/AmpliCenter connections.
CAUTION:
Do not connect a Trunk Adapter manufactured
before July 1988 to an Amplicenter. Doing so may
damage the Trunk Adapter. See the Trunk
Adapter front panel for the date of manufacture.
TRUNK ADAPTER
V-5335300

TECHNICAL ASSISTANCE

When calling, have a VOM and a telephone test
set available and call from the job site. Call (540)
427-3900 and ask for PagePac Technical Sup-
port, or call (540) 427-6000 for Valcom 24-hour
Automated Support or visit our websites at
http://www.pagepac.com and www.valcom.com.
Should repairs be necessary, attach a tag to the
unit clearly stating company name, address,
phone number, contact person, and the nature of
the problem. Send the unit to:
1
Valcom, Inc.
®
PagePac Repair Dept.
5614 Hollins Road
Roanoke, VA 24019-5056
Issue 2
947183