Table of Contents
Advertisement
PROBLEM GUIDE
PROBLEM GUIDE
PROBLEM
No power.
Timer recording is not
possible.
REC mode cannot be
engaged.
Picture is poor on playback.
No picture on playback.
Playback picture is partially
noisy.
TV program cannot be
recorded or cannot be seen.
TV cannot be operated.
The indication of the VCR's
display appears abnormal or
no button can be engaged.
THINGS TO CHECK
Is power cord connected?
Is the program timer set
correctly?
Is the POWER switch set to
OFF?
Is the record safety tab
missing?
Is the record safety tab
missing?
Is the TV channel selector on
the proper channel?
Is the TV fine tuning set
correctly?
Is the TV set to the proper
channel?
Is the TRACKING adjusted
correctly?
Is connection correct?
---
81
SOLUTION
Connect power cord to AC
outlet.
Set the program timer
correctly.
Set the POWER switch to
OFF.
Place cellophone tape over
missing safety tab?
Place cellophone tape over
missing safety tab.
On playback, the TV channel
selector should be on channel
3 or 4
Fine tune your TV.
Set the correct channel, CH3
or 4 (for your video channel.)
Press either TRACKING
control button (
or
best picture.
Connect correctly.
First press the TV button and
then press the button, which
corresponds to the TV function
you want.
Push the reset switch using a
toothpick, etc. The display will
be reset. Then set the
information again.
) for
Advertisement
Table of Contents
