Installing The Srp500 Services Ready Platforms; Placement Tips; Top View - Cisco SRP520 Quick Start Manual

Top View

Feature
WPS Button
Installing the SRP500 Services Ready
3
Platforms
You can install the SRP on a desktop or other flat horizontal surface or
mount it on a wall.
The SRP has an adjustable WiFi antenna located on the side panel
N
OTE
of the unit.

Placement Tips

Make sure that you install the SRP in a location that meets these
environmental conditions:
• Storage Temperature (sea level) -22° F to 140° F (-30° C to +60° C)
• Operating Temperature (sea level) 32° F to 104° F (0° C to 40° C)
• Relative Humidity (sea level) 5 to 95% RH (non-condensing)
8 Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520 Models)
WPS Button
Description
Use to automatically configure wireless security for devices
that support WiFi Protected Setup (WPS).
To configure WPS, press and hold this button until the WPS
light flashes. Make sure that the device is located near the
SRP during setup.