Troubleshooting - Oreck DualMax User Manual

Trouble-
shooting
Problem
Unit does not
turn ON
Truman Cell
®
light has turned
solid amber.
Truman Cell
®
light is blinking
amber.
Unit does not
remove particles.
Unit sparks,
crcrackles and
pops.
Unit still does
not operate
properly.
Service problems that appear to be major can often be solved easily.
You can be your own troubleshooter by reviewing this guide.
All other servicing should be done by an Oreck authorized
service center.
Check
• Power Cord
• Selector Switch
• Cover
Truman Cell
®
Truman Cell
®
Truman Cell
®
Truman Cell
®
Review all the
above.
13
• Plug in Power Cord
• Set Selector Switch for desired fan speed.
• Make sure the cover is securely closed
• A solid amber light is a 30 day cleaning
reminder. Wash Collector Cell. Make sure
it is thoroughly clean before reinstalling.
• A fast blinking light indicates the power
supply has shut down due to arcing or
short circuit. The cell should be inspected
and cleaned, repaired, or replaced.
• A slow blinking light indicates the unit is
in Dry Mode.
• Clean the Truman Cell
• Truman Cell
®
Oreck for service.
• Sparking or popping noise (arcing) can occur
when a large particle is captured in the
Truman Cell . If the unit is arcing excessively,
®
the cell may be dirty. Try cleaning the
Truman Cell .
®
• If excessive arcing continues after proper
cleaning, the Truman Cell
If damaged, contact Oreck for service.
Contact Oreck for service.
Solution
.
®
may be damaged. Contact
may be damaged.
®