Table of Contents
Advertisement
24
Operating
AUTO POWER On/Off
Before operating this function, make sure that
you have selected OPTICAL and turn on the AUTO
POWER.
This function automatically turns on/off the unit
when you turn on/off the external device (TV, DVD
Player, Blu-ray Disc Player, etc.) connected to this
unit by the optical cable.
When turning on the unit by this function, Optical
function is selected directly no matter what kind of
function has been selected before turning off it.
This function turns on or off each time you press
AUTO POWER.
3
Display
AUTO POWER ON
AUTO POWER OFF
,
Note
y This function is intentionally designed to
turn off the unit after 1 minute of inactivity
in OPTICAL mode. Only if the unit has
already received the signal transmitted
through the optical source and there is no
digital audio signal going to the unit, the
unit will turn off after 1 minute of inactivity
with AUTO POWER function is turned on.
y Depending on the connected device by the
optical cable, this function may not operate.
y If you want to use AUTO POWER, SIMPLINK
must be turned off. It takes for about 30
seconds to switch on or off SIMPLINK.
y If SIMPLINK is set to ON, "AUTO POWER OFF"
is just scrolled, even thouth you press AUTO
POWER.
y Once AUTO POWER is set, the unit will
start as OPTICAL mode automatically next
time, no matter what kind of function you
selected before.
y It is not available to turn on the unit by
AUTO POWER function if you turn off the
unit directly.
y AUTO POWER function is not supported on
LG Sound Sync (Wireless) mode.
NB4530A-NE_BGBRLLK_ENG_0510.indd 24
Operation
AUTO POWER function is
turned on.
AUTO POWER function is
turned off.
Auto power down
This unit will be off itself to save electric
consumption in the case main unit is not
connected to external device and is not used for 25
minutes.
So does this unit after six hours since Main unit
has been connected to other device using analog
input.
But the unit can turns on automatically based on
the [AUTO POWER] function you've set.
Sleep timer setting
Press SLEEP repeatedly to select the desired time
period options (in minutes):
LCD OFF(Display window off ) -> DIMMER(The
display window will be darken by half ) -> Sleep
timer value -> Display on
In display window you see "LCD OFF" and the
display window turns off .
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until "SLEEP 10" appears, and then press
SLEEP once again while "SLEEP 10" is displayed.
,
Note
You can check the remaining time before the
unit turns off . Press SLEEP the remaining time
appears in the display window.
2013-10-30
12:30:47
Hide quick links:
Advertisement
Table of Contents
