Auto Setup - LG HRT403DA Owner's Manual

HR403DAM-P.BGBRLL ENG 7/8/08

Auto setup

During the first use of the HDD/DVD recorder ,
the initial setup wizard sets the language, clock and
channels automatically.
1 Turn on the unit:
The initial setup wizard appears on the screen.
2 Choose a language:
3 Select the chosen language:
4 Check the antenna and go to the next step:
5 Choose a clock setting mode:
6 Select the chosen clock setting mode:
7 Set the clock:
This step is not available for Auto mode
8 Choose a broadcasting type:
All or Analog
9 Select the [Start] and starts channel scan:
10 Close the initial setup:
Auto setup - more you can do
Adjust the programmed channels
Press HOME, then use b b B B to select [Easy Menu] option. Press OK( ) while
[SETUP] is selected. The SETUP menu appears on the screen. Select the
[Program Edit] on the second level options then press B B to move to the third
level. Press OK( ) while [Edit] option is selected. The channel editing screen
appears on the screen.
Select which channel you would like to edit and press OK( ). An option menu
on the left side of the screen will be highlighted.
16
2:22 PM Page 16
ON REMOTE
POWER
v v V V
OK ( )
OK ( )
v v V V
OK ( )
v v V V b b B B ,
OK ( )
v v V V
B B , OK ( )
OK ( )
[Favorite]: Set the program to favorite channel.
[Delete] (Analog channel only): Delete the selected channel from
programmed channel list.
[Move] (Analog channel only): Change the order of the channels and which
numerical button they correspond to.
[Station Rename] (Analog channel only): change the name of the selected
channel.
[Program Edit] (Analog channel only): Change the settings of a channel
manually.
Editing a channel (Analog channel only)
You can change the settings of programmed channel by selecting
[Program Edit] option on the left side of the channel editing screen.
[PR]: Indicates the selected channel position.
[Seek]: Searches for a channel automatically. Searching stops when the unit
tunes in a channel.
[Ch.]: Changes the channel number.
[MFT]: Fine tunes the channel to obtain a clearer picture.
[CANAL]: Sets the channels for the decoder. You need this setting to watch
or record PAY-TV/Canal plus programs.
[NICAM]: Sets the channels for the NICAM broadcast.
[OK]: Confirm the settings and return to the channel list menu.