Table of Contents
Advertisement
Safety
CAUTION
Do not attach the electronic board to
mortared walls. Accidental electric
leakage from the mounting bolts securing
the up/down unit to metal laths or wire
laths can cause heat, smoke or fire.
Confirm the bolts of the unit are certainly
caught by the up/down unit by pulling the
elite Panaboard after hanging the elite
Panaboard on the up/down unit if the unit
is mounted on a wall.
Be sure to put on a glove to avoid injury.
Do not remove the up/down locking
plates until you are ready to attach the
board and projector.
If these plates are removed by mistake,
the up/down part may spring up and
cause injury.
Lock the casters (when using the stand)
both after installation has been completed
and after the stand has been moved.
If the stand is used with the casters
unlocked, it may move or be overturned
and/or cause injury.
After completing the installation or
moving the stand to another location, be
absolutely sure to attach the foot
reinforcing assemblies to prevent the
stand from toppling.
Locking the
casters
(Push to lock)
Be careful around the projector ventilation
area, which becomes hot.
Working in this area or touching nearby
objects may cause injury.
Installation Manual
For Your Safety
15
Advertisement
Table of Contents
