Features; Names And Operations Of Parts - Ikegami PM-K5 Instruction Manual

3. FEATURES

• A high reliability design minimizes failures. The use of stable circuits ensures high quality videos without adjustments
even when a change in the supply voltage or temperature occurs.
• Built-in dc regenerative and ABL circuits always provide a stable video from bright to dim to display the monitoring
target with high fidelity.
• The video input is equipped with a loop through output terminal. A 75 Ω termination is switched on/off automatically to
allow a bridge connection, so that you can build a system consisting of various video devices and two or more monitors.
• The power unit employs a switching regulator system to support a wide range of supply voltages and achieve a reduction
in power consumption and weight.
• The use of a metal monitor cabinet minimizes magnetic or noise effects from/to the outside. This metallic cabinet also
maintains sufficient strength and safety.
• The response of a video amplifier to a wide range of frequencies, excellent linearity in the deflection system and other
features further enhance the quality of videos.
• The safety standards for X-rays from CRT, etc., are fully taken into account to meet the safety requirements for the
equipment.

4. NAMES AND OPERATIONS OF PARTS

• Front panel
ON
OFF
POWER switch
Switch for turning on/off the power to the equipment.
Pushing this switch turns on the power and pushing it
again turns off the power.
POWER indicator
When the power switch is pressed, this indicator goes
on to show that the monitor is energized.
V. HOLD cont r ol
Control for adjusting the vertical synchronization of
videos. Turning this control clockwise causes videos to
flow in the direction from top to bottom. Turning it
counterclockwise causes videos to flow in the direction
from bottom to top.
POWER
V i d e o M o n i t o r
1 2
V. HOLD H. HOLD BRIGHT. CONT.
3 4 5
H. HOLD control
Control for adjusting the horizontal positions of videos.
Turning this control clockwise causes videos to move
to the right. Turning it counterclockwise causes videos
to move to the left.
BRIGHT. control
Control for adjusting the brightness of videos. Turing
this control clockwise brightens videos. Turning it
counterclockwise dims videos.
CONT. control
Control for adjusting the contrast of videos. Turning this
control clockwise increases the contrast. Turning it
counterclockwise decreases the contrast.
E-2
6
* Illustrated is the PM-K12.