showdscp(8)
OPTIONS
EXAMPLES
368
The following options are supported:
-d domain_id
Displays an individual domain's IP address.
Displays usage statement.
-h
When used with other options or operands, an error occurs.
Generates parsable output.
-p
Displays the Service Processor's IP address.
-s
Specifies verbose output. Prints additional information about
-v
internal progress of the program's operations to the screen.
Caution – The IP addresses shown in the following examples are examples only.
Refer to the site planning guide for your server for more information about valid IP
addresses for your network. Using invalid network IP addresses could, under
certain circumstances, make your system unbootable!
XSCF Reference Manual • Last Revised January 2007