Fujitsu SPARC Enterprise M4000 Reference Manual page 25

man
moveboard
nslookup
password
poweroff
poweron
prtfru
rebootxscf
replacefru
reset
resetdateoffset
sendbreak
setaltitude
setarchiving
setaudit
setautologout
setcod
setdate
setdcl
setdomainmode
setdomparam
setdscp
setdualpowerfeed
setemailreport
sethostname
sethttps
System Administration
display manual pages of specified XSCF shell command
move an eXtended System Board (XSB) from the current
domain to another
refer to the DNS server for the host
manage user passwords and expiration settings
turn off the power to the specified domain
turn on the power to the specified domain
display FRUID data on the system and External I/O
Expansion Unit
reset the XSCF
replace a field replaceable unit (FRU)
reset the specified domain
reset the time subtraction between XSCF and the domain.
send a break signal to the specified domain
set the altitude of the system
configure the log archiving functionality
manage the system auditing functionality
set the session timeout time of the XSCF shell
set up the Capacity on Demand (COD) resources used for
domains
set the date and time of XSCF
set a domain component list (DCL)
set a domain mode
forcibly rewrite OpenBoot PROM environment variables
set the IP address assignments for the Domain to Service
Processor Communications Protocol (DSCP)
set dual power feed mode
set up the email report configuration data
set a host name and domain name for an XSCF unit
start or stop the HTTPS service, which is used in the XSCF
network. This command also performs authentication-
related settings.
Intro(8)
3