Fujitsu D2860 Technical Manual page 14

Overview
– 2 MB Flash ROM
– 32Mx16-667 DDR2 SRAM for iRMC S2
– ADT7462 temperature/system monitoring controller
Graphic
– integrated VGA controller with PCIe x1 interface (PILOT-II)
– 8 MB graphic memory available via driver
LAN – Ethernet controller
®
– 2x Intel 82575X2 dual-port 10/100/1000 MBit/s Base-T Ethernet controller
– 1x BCM5221 for iRMC S2
Storage devices
– 2x SAS (1.5 Gbit/s) or 2x SATA
– 2.5" drive slide-in modules are supported
– UFD (USB Flash Disk)
External connectors
– 4x USB 2.0 interfaces with 480 Mbit/s at the front side
– 1x serial interface at the front side
– 1x VGA
Internal connectors
– 1x VGA port at the front side
– 1x universal USB port for 4 USB connectors at the front side
– 1x UFD port (USB Flash Disk connection) for USB Flash ROM
– 9x slots for DDR3 memory modules
– power supply (12 V and 5 V auxiliary supply)
– combined connector for HDD power supply and fan
– 2x power supply connectors
iRMC S2 Server Management controller
– basic functionalities: fan control, voltage supervision for onboard voltages,
temperature monitoring, System Event Log and ASR&R (Automatic Server
Reconfiguration and Restart)
– PDA
– Global Error/CSS/ID LED
– pre-failure warranty for memory
14 Technical Manual
Features
D2860 (BX920)