Lenovo 3000 C Series Service And Troubleshooting Manual page 34

Replacing memory
2. Turn off the computer; then disconnect the ac adapter and all cables
3. Close the computer display, and turn the computer over.
4. Remove the battery.
5. Depending on the type of the memory slot cover, loosen the screw(s) 1
6. If two SO-DIMMs are already installed in the memory slots, remove one
26
Lenovo 3000 C Series and N Series Service and Troubleshooting Guide
from the computer.
on the cover and remove it 2 as shown in figures.
Slot cover with a screw:
2
Slot cover with three screws:
of them to make room for the new one by pressing out on the latches on
both edges of the socket at the same time. Be sure to save it for future
use.
1
1
2
1
1