About HDMI—General Description Defining the RTBUS-21 The RTBUS-21 Connecting Surface Installing the RTBUS-21 Drilling a Hole in the Table Mounting the RTBUS-21 in the Table Connecting the Cables and Wires Using the RTBUS-21 Technical Specifications Figures Figure 1: RTBUS-21 Top View...
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11: Sierra Video Products. Thank you for purchasing the Kramer RTBUS-21 Round Table Connection Bus, which is ideal for using in boardrooms, conference and training rooms! RTBUS-21 - Introduction...
Use Kramer high-performance high-resolution cables Go to http://www.kramerelectronics.com to check for up-to-date user manuals, a complete list of Kramer wall plates and module connectors, application programs, and to check if firmware upgrades are available (where appropriate). Achieving the Best Performance To achieve the best performance: •...
1 Ethernet port on an RJ-45 connector The RTBUS-21 supports HDMI with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, and CEC. We offer the RTBUS-21 in either a black anodized or a brushed clear aluminum surface. RTBUS-21 - Overview...
It delivers the maximum high-definition image and sound quality in use today. Note that Kramer Electronics Limited is an HDMI Adopter and an HDCP Licensee.
Enables automatic lifting and smooth closing of the lid Connecting Surface Figure 2 Rubber Protectors Protect the table surface when mounting the unit (2) For securing the RTBUS-21 to the table(2) Mounting Screws Locking Butterfly Nuts Tighten to lock the mounting butterfly screw (2) Mounting Butterfly Nuts...
The RTBUS-21 Connecting Surface Figure 2 defines the connecting surface: Figure 2: RTBUS-21 Connecting Surface Feature Function ETHERNET RJ-45 Connector Connect to a network AUDIO 3.5mm Mini Jack Connects to an unbalanced stereo audio source PC 15-pin HD Connector Connects to a VGA source...
The thickness of the table should be 3in (76mm) or less. 2. Clean the table surface. Take care not to damage the table. Kramer Electronics is not responsible for any damage caused to the table. RTBUS-21 - Installing the RTBUS-21...
Mounting the RTBUS-21 in the Table To mount the unit, follow these steps: Step 1: Insert the RTBUS-21 into the hole cut into the table making sure the outer rim is firm against the surface of the table. Step 2: From underneath the table, slide the mounting brackets into the appropriate slots.
MALE connector at the free end so they can be plugged directly into the acceptors. You can extend these cables if required. Note that the connecting surface is an integral part of the RTBUS-21 enclosure and cannot be detached. RTBUS-21 - Installing the RTBUS-21...
Using the RTBUS-21 Once the RTBUS-21 is installed, you can easily customize it to your own needs by directly plugging in the required AV equipment, as illustrated in the example in Figure Figure 4: RTBUS-21 Boardroom Installation RTBUS-21 - Using the RTBUS-21...
FUSE RATING: T 6.3A 250V DIMENSIONS: 13cm x 16cm (5.1" x 6.3") Diameter, H WEIGHT: 0.85kg (1.9lbs) approx. 1.2kg (2.6lbs) approx. with mounting brackets ACCESSORIES: Power cord Specifications are subject to change without notice at http://www.kramerelectronics.com RTBUS-21 - Technical Specifications...
Page 16
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the RTBUS-21 and is the answer not in the manual?
Questions and answers