Contents Introduction Getting Started Achieving the Best Performance Safety Instructions Recycling Kramer Products Overview Defining the RTBUS-11 Round Table Connection Bus Installing the RTBUS-11 Drilling a Hole in the Table Mounting the RTBUS-11 in the Table Connecting the Cables Using the RTBUS-11...
Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our...
Achieving the Best Performance To achieve the best performance: Use only good quality connection cables (we recommend Kramer high- performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) ...
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
Overview The RTBUS-11 is an elegant furniture-mounted, round connection bus, featuring a pneumatic mechanism for automatic lifting and smooth closing of its lid. The RTBUS-11 is easily installed into a table or podium top for the USA (Power Input - 110V AC).
Feature Function Black Anodized or Brushed Covers the connecting surface, leaving the table surface Aluminum semi-automatic Lid neat and tidy Outer Rim Fits over the table surface Pneumatic Mechanism Enables automatic lifting and smooth closing of the lid Connecting Surface Figure 2 Rubber Protectors Protect the table surface when mounting the unit (one on...
Note: The thickness of the table should be 3in (76mm) or less. 2. Clean the table surface. Take care not to damage the table. Kramer Electronics is not responsible for any damage caused to the table. RTBUS-11 - Installing the RTBUS-11...
Mounting the RTBUS-11 in the Table To mount the unit, follow these steps: Step 1: Insert the RTBUS-11 into the hole cut into the table making sure the outer rim is firm against the surface of the table. Step 2: From underneath the table, slide the mounting brackets into the appropriate slots.
Page 12
Step 3: Tighten the butterfly mounting screws securely upward against the table. Step 4: Lock the mounting screws into position with the locking butterfly screws. RTBUS-11 - Installing the RTBUS-11...
Note that the connecting surface is an integral part of the RTBUS-11 enclosure and cannot be detached. Figure 3: Connecting the Cables We recommend that you use the Kramer C-AC/US Power Cord - 6ft USA 110V AC (P/N: 91-000099) to power the unit.
Using the RTBUS-11 Once the RTBUS-11 is installed, you can easily customize it to your own needs by plugging in the required AV equipment, as illustrated in the example in Figure Figure 4: RTBUS-11 Boardroom Installation RTBUS-11 - Using the RTBUS-11...
Page 18
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the RTBUS-11-B and is the answer not in the manual?
Questions and answers