Getting Started Achieving the Best Performance Safety Instructions Recycling Kramer Products Overview Defining the RTBUS-11 Round Table Connection Bus Installing the RTBUS-11 Drilling a Hole in the Table Mounting the RTBUS-11 in the Table Connecting the Cables Using the RTBUS-11...
Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our...
Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer RTBUS-11 away from moisture, excessive sunlight and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
The RTBUS-11 is easily installed into a table or podium top for the USA (Power Input - 110V AC). The RTBUS-11 enables you to connect any equipment to systems installed in a room via cable access or passive interfaces.
Figure 1: RTBUS-11 Round Table Connection Bus Feature Function Black Anodized or Brushed Covers the connecting surface, leaving the table surface Aluminum semi-automatic Lid neat and tidy Outer Rim Fits over the table surface Pneumatic Mechanism Enables automatic lifting and smooth closing of the lid...
Figure 2: RTBUS-11 Connecting Surface Feature Function RJ-45 Connector Connect to a network 15-pin HD Connector Connects to a VGA source HDMI Connector Connect to HDMI source Power Socket Connects to 110V AC power 3.5mm Mini Jack Connects to an unbalanced stereo audio source...
Note: The thickness of the table should be 3in (76mm) or less. 2. Clean the table surface. Take care not to damage the table. Kramer Electronics is not responsible for any damage caused to the table. Mounting the RTBUS-11 in the Table...
Page 11
Step 1: Insert the RTBUS-11 into the hole cut into the table making sure the outer rim is firm against the surface of the table. Step 2: From underneath the table, slide the mounting brackets into the appropriate slots. Step 3: Tighten the butterfly mounting screws securely upward against the table.
Connecting the Cables Figure 3 illustrates how to connect the cables to the underside of the unit: Note that the connecting surface is an integral part of the RTBUS-11 enclosure and cannot be detached. Figure 3: Connecting the Cables RTBUS-11 - Installing the RTBUS-11...
Using the RTBUS-11 Once the RTBUS-11 is installed, you can easily customize it to your own needs by plugging in the required AV equipment, as illustrated in the example in Figure Figure 4: RTBUS-11 Boardroom Installation RTBUS-11 - Using the RTBUS-11...
T 6.3A 250V DIMENSIONS: 10.5cm x 16cm (4.1" x 6.3") Diameter, H WEIGHT: 0.85kg (1.9lbs) approx. 1.2kg (2.6lbs) approx. with mounting brackets INCLUDED ACCESSORIES: Six self-locking ties Specifications are subject to change without notice at http://www.kramerelectronics.com RTBUS-11 - Technical Specifications...
Page 16
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...