Set The Inputs; Input 3 Auto Link - Hitachi Ultravision P50H401 Operating Manual

Setup

Set The Inputs

Use this feature to give a name to any of the video
inputs.
1. Press the CURSOR PAD ,
inputs.
2. Press the CURSOR PAD
choices.

INPUT 3 Auto Link

Use this function to automatically turn the TV on and tune
to INPUT 3 when it detects a video signal to INPUT 3.
1. Use the CURSOR PAD ,
Auto
When AUTO is selected, the TV will turn on and switch to INPUT 3 automatically, when the INPUT 3 input
device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player, or
DVD player.
Off
Select OFF to disable this function.
2. Press EXIT to quit menu or select AUTO LINK to return to previous menu.
1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK
is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and
will turn on your TV as described above.
2. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will
automatically turn off after three hours.
52
to highlight the video
, to select your
OR
, or to highlight and select the AUTO LINK setting of your choice.
Setup
Setup The Menu Options
Set The Screen Saver
Set The Inputs
Set The Closed Captions
Set The Quick Start Options
Reset The Software
Move Select
SEL
Setup
Set The Inputs
Input1 :
****
Input2 :
****
Input3 :
****
Auto Link : Off
Input-Front :
****
HDMI1 :
****
HDMI2 :
****
HDMI-Front :
****
Move SEL Return