Connecting A Dtv Receiver/Set-Top Box With Component Video And A Vcr - Hitachi 50HDA39 Operating Manual

Rear Panel Connections
Connecting a DTV receiver/set-top box
with component video and a VCR
This connection allows you to watch DTV (digital TV), VCR, and
TV programs, and record DTV and TV programs.
Your TV has component video inputs. Connecting your TV to a
DTV receiver with component video can greatly enhance picture
quality and realism.
Stereo VCR
From Antenna
INPUT
RF IN
R L VIDEO
TV back panel
3X80801A_En_p10-17 11
From DTV
DTV Receiver with Component video
Antenna
OUTPUT COMPONENT OUT
RF OUT RF IN
R L VIDEO
Pr
OUTPUT
R L VIDEO
Note:
You can connect the component video
cables to either set of Component 1 or
Component 2 jacks on the TV .
The Component 1 or Component 2 jacks
and HDMI-1 and HDMI-2 jacks can be used
with Progressive (480p, 720p) and
Interlaced (480i, 1080i) scan systems.
If your DTV receiver does not have compo-
nent video, use the S-video and standard
audio connections instead. Do not connect
both an S-video and a standard video cable
to VIDEO-1 (or VIDEO-2) at the same time
or the picture performance will be
Pb Y
unacceptable.
For an HDMI connection, see page 13.
OUTPUT
R L VIDEO
7/12/06, 10:42 AM
11