Connecting A Component And Stereo Audio Source To Input 2 Or 3 :Y-Pbpr; Connecting External Audio/Video Devices - Hitachi Ultravision P50H401 Operating Manual

test-bleed 3/3/06 10:18 AM

Connecting External Audio/Video Devices

CONNECTING A COMPONENT AND STEREO
AUDIO SOURCE TO INPUT 2 or 3 :Y-P
1. Connect the cable from the Y OUT of the
Laserdisc/DVD player or HDTV set top box to
the INPUT (Y) jack, as shown on the Rear
panel below.
2. Connect the cable from the P B /C B OUT or B-
Y OUT of the Laserdisc/DVD player or HDTV
set top box to the INPUT (P B) jack.
3. Connect the cable from the P R /C R OUT or R-
Y OUT of the Laserdisc/DVD player or HDTV
set top box to the INPUT (P R ) jack.
4. Connect the cable from the AUDIO OUT R of
the Laserdisc/DVD player or HDTV set top box
to the INPUT (AUDIO/R) jack.
5. Connect the cable from the AUDIO OUT L of
the Laserdisc/DVD player or HDTV set top box
to the INPUT (AUDIO/L) jack.
6. Press the INPUTS button, then select INPUT 2 or 3
from the INPUTS menu to view the program
from the Laserdisc/DVD player or HDTV set
top box.
7. Select CABLE or AIR to return to the last
channel tuned.
Page 19
P .
B R
1. Completely insert the connection cord
plugs when connecting to rear panel jacks.
The picture and sound that is played back
will be abnormal if the connection is loose.
2. See page 18 for tips on REAR PANEL
CONNECTIONS.
CABLE
or
Air signal
DVD Player
Back of
DVD Player
OUTPUT
VIDEO
AUDIO
L
OR
P /C P /C Y
R L R R B B
HDTV Set-Top Box
OUTPUT
R Y P P
B R
21