Before Operating External Video Source - Hitachi Ultravision P50H401 Operating Manual

test-bleed 3/3/06 10:18 AM
Connecting External Video Sources
The FRONT panel jacks are provided as a convenience to allow you to easily connect a camcorder , DVD, Video
Game and a VCR as shown in the following examples:
UPGRADE CARD
(SERVICE USE ONLY)
NOTE:1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set
Top Box to your Plasma TV is dependent on the model and features of each component. Check the
owner's manual of each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to
accommodate your particular assortment of components and features. For best performance, video and
audio cables should be made from coaxial shielded wire.

Before Operating External Video Source

Connect an external source to one of the INPUT terminals, then press the INPUTS button to show the
INPUTS menu. Use the CURSOR PAD (
the SELECT button or the CURSOR PAD
16
Page 14
FRONT INPUT PANEL
-
PUSH EJECT
Video Game
played back picture may be abnormal.
INPUTS
Note : Special device cables will be
OUTPUT
L R
Video
COMPOSITE VIDEO
OUTPUT CAPABILITY
DVD , Video Game
Console.
Video Camera
and ) to select the Input of your choice. Then press
to confirm your choice (see page 26).
HDMI 2
HDMI-Front
Air / Cable
Input 1
Input 2
Move SEL Sel.
according to the own device
specifications.