Connecting External Video Sources; Before Operating External Video Source - Hitachi 55HDT52 Operating Manual

Hitachi operating guide plasma television 42hdt52, 42hdt52a and 55hdt52
Table of Contents

Advertisement

Connecting External Video Sources

The front panel jacks are provided as a convenience to allow you to easily connect your video camcorder, digital
camera or Digital Video Camcorder as shown in the following examples:
Left Side Panel
INPUT 5
INPUT 5
R
L/MONO
AUDIO
VIDEO S-VIDEO
S-Video cable
Video Camera
Video Camera
NOTE: 1. Completely insert connection cord plugs when connecting to left side panel jacks. If you do not, the
played back picture may be abnormal.
2. If you have a S-VHS VCR, use the S-VIDEO cable in place of the standard video cable.
3. If you have a mono VCR, insert the audio cable into the left audio jack of your TV.
4. S-VIDEO input takes priority over VIDEO input.
5. If you have a VHS or 8mm camcorder, use the S-VIDEO cable in place of the VIDEO cable.
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set
Top Box to your Plasma TV is dependent on the model and features of each component. Check the
owner's manual of each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to
accommodate your particular assortment of components and features. For best performance, video and
audio cables should be made from coaxial shielded wire.

Before Operating External Video Source

Connect an external source to one of the INPUT terminals, then press the INPUTS button to show the
INPUTS menu. Use the CURSOR PAD (
the SELECT button or the CURSOR PAD
INPUT 5
INPUT 5
IEEE1394
IEEE1394
PHOTO
PHOTO
DV INPUT
DV INPUT
INPUT
INPUT
R
L/MONO
AUDIO
VIDEO S-VIDEO
Ferrite Core Instructions:
Ferrite Core Instructions:
1. Wrap once the USB cable or IEEE
1394 cable (not supplied) on the
ferrite core near the Photo Input
or IEEE 1394 Input as shown.
2. Fold and close the ferrite core
while being careful not to pinch
the cable.
Digital Video Camcorder
Digital Video Camcorder
and
) to select the Antenna or Input of your choice. Then press
to confirm your choice (see page 26).
Photo Input
IEEE 1394
Cable
Air
Input 1
Move
SEL Sel.
Left Side Panel
PHOTO
PHOTO
IEEE1394
IEEE1394
DV INPUT
DV INPUT
INPUT
INPUT
Ferrite
Ferrite
Ferrite
Ferrite
Core
Core
Core
Core
IEEE 1394
IEEE 1394
Cable
Cable
USB
USB
Cable
Cable
Digital Camera
Digital Camera
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

42hdt52a42hdt52

Table of Contents