Table of Contents
Advertisement
Maximum Heat setpoint temp.
Default is 99°.
Minimum Cool Set-
point temp.
– Default is 45°. These
settings are the highest temperature
Heat
limit in
mode or the lowest tem-
Cool
perature limit in
setting of
99°
to
45°
for the maximum
heating temperature or
the minimum cooling temperature.
Temperature Display Adjust
Default is 0°. Your thermostat was
accurately calibrated at the factory.
However, this option allows you to
change the humidity or temperature
displayed to match other thermostats
in your home.
De-Hum setpoint
– Default is 95%.
The Dehumidification setpoint is the
percent of humidity that the cooling
system will try to reach. Dehumidifica-
tion is accomplished through control
of the compressor and speed of the
circulator blower.
Adjust the dehumidification setpoint to
40%
to 95%.
a value from
Humidity Setpoint
– Default is 20%.
Humidity setpoint is the percent
humidity that the heating system and
humidifier will attempt to maintain in
Heating.
Adjust the humidity setpoint to a value
20%
to 90%.
from
–
mode. Select a
45°
to
99°
for
–
15
Advertisement
Table of Contents
