NordicTrack 831.24924.0 User Manual page 8

3. Remove the tie securing the Upright Wire (84) to
the right Upright (79).
With the help of a second person, hold the con-
sole assembly (A) near the Upright (79).
Attach the console assembly (A) with four 5/16"
x 1" Screws (2) and four 5/16" Star Washers (3).
See the inset drawing. Be careful not to pinch
the wires (B, 84). Start all four Screws, and
then tighten them.
4. Connect the Upright Wire (84) to the console
wire (B). See the inset drawing. The connec-
tors should slide together easily and snap
into place. If they do not, turn one connector
and try again. IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
Insert the wires (B, 84) into the console
assembly (A).
3
A
2
3
4
A
8
84
B
2
3
B
84 79
B
84
B
84