Set The Menu Background; Screen Saver; Image Power; Screen Wipe - Hitachi 42HDT79 Operating Manual

Setup

Set the Menu Background

This function allows you to choose from two menu
backgrounds.
1. Use the CURSOR PAD
SET THE MENU BACKGROUND (SHADED
OR SOLID) of your choice. Use the CURSOR
PAD or to select shaded or solid.
2. Select SOLID for a black background (no
picture can be seen behind menu screen),
select SHADED and a light background is
visible.
3. Press EXIT to quit menu or select MENU PREFERENCE to return to previous menu.

Screen Saver

Continuous on-screen displays such as video games,
stock market quotations, computer generated graphics,
and other fixed (non-moving) patterns can cause
permanent damage to the Plasma Television. Use the
SCREEN SAVER feature to hide screen burn.
1. Use CURSOR PAD or
Saver's Main Picture Moving and Image Power
options.
2. Use the CURSOR PAD or
choices.
Option 1
The whole picture will shift every 2 minutes by one
pixel.
Option 2
The whole picture will shift every 10 minutes by one
pixel.
Option 3
The whole picture will shift every 20 minutes by one
pixel.

Image Power

This function allows you to choose power consumption reduction based on 3 levels (min., medium and max).

Screen Wipe

If pattern mark occurs, use Screen Wipe (White Field Signal) for at least 10 minutes to refresh any damage that
may have occurred from a pattern mark. Screen Wipe can resolve pattern mark to a certain degree, if caution
is not used, permanent damage may occur. Use the cursor pad
Press the SELECT button to start.
Press the EXIT button to return to normal viewing.
Automatic Power Saving
Use this feature to turn power off automatically when a video input signal is not detected in 15 seconds.
NOTE: This feature is only available in INPUT 1-5.
or to highlight
to highlight Screen
to select your
Setup
Menu Preference
Set The Language : English
Set The Menu Background : Shaded
SEL
Move Return
Setup
Set The Menu Options
Set The Screen Saver
OR
Set The Inputs
Set The AV Net
Set The Closed Captions
Set The Output Terminals
Set The Quick Start Options
Reset The Software
SEL
Move Select
Setup
Set The Screen Saver
OR
Main Picture Moving : Option 1
Image Power : Max
Screen Wipe : Wipe
Automatic Power Saving
Yes No
Move Select
SEL
or to highlight Screen Wipe.
67