Hitachi 42HDT79 Operating Manual page 28

How to Use the Remote to Control Your TV
DAY/NIGHT button
Press this button to toggle between Day(Normal),
Day(Dynamic) and Night picture mode settings.
Select Day modes for day time viewing with more
brightness and contrast to compete with room light.
Select Night for nighttime viewing with less brightness
and contrast for amore detailed picture (see page 47
for settings changes).
NOTE: For automatic DAY/NIGHT picture mode
settings, see page 65.
PICTURE-IN-PICTURE button
See separate section on pages 33-34 for a
description.
MENU button
The MENU button will start the On-Screen Display.
INFO button
Press this button when you want to check the
channel being received, the picture source, if the
channel has stereo (ST) or second audio program
(SAP), the time, CHANNEL ID and if the TIMER is
set.
ANALOG CHANNELS
Program Information
Show Name
3:00PM- 3:30PM
Program Run Time
ST TV-G
INFO
Broadcast
Audio
Broadcast Rating
Auto STEREO
Closed
Audio Source
Caption setting
Selection
DIGITAL CHANNELS
Digital Closed Caption
This icon will appear only when
receiving a Digital Broadcast with
Closed Captioning.
Program Information Show Name
3:00PM- 3:30PM ALT U.S.
Program Run Time
ST TV-G DTvCC
INFO
Audio Broadcast Alternate
Broadcast Rating Rating
Program Desctiption
(Press INFO again for a more detailed description)
Auto
Closed
Caption setting
When an S-VIDEO Input is connected
to INPUT 1
INFO
Auto
NOTE: 1. The Sleep Timer info will show
momentarily after releasing INFO button.
2. The Aspect setting will not be shown if
the channel is locked.
28
Main Picture Source
and channel indication
Air 8
Broadcast channel
KXYZ-HD
identification
480i 3:17PM
Clock
Picture Format
Main Picture Source
Air 15-1 and channel indication
Broadcast channel
KPBS-HD
identification
1080i 3:17PM
Clock
Picture Format
INPUT 1
INPUT 2
S-IN: 1
INPUT 3
480i 3:17PM
INPUT 4
INPUT 5
AIR /
PHOTO INPUT Select to access your pictures from a
IEEE1394
When a Component Video: Y-PbPr
Input is connected to INPUT 3
INFO
Auto
EXIT button
This button will exit all On-Screen Displays.
CURSOR PAD/SELECT button
All the On-Screen Display features can be set or
adjusted by using the CURSOR PAD, except for
numeric entries. The CURSOR PAD will highlight
functions or adjust and set different features. Press
the CURSOR PAD toward desired direction and
press the SELECT button to select.
GUIDE button
Press this button to access the TV Guide On
Screen TM interactive display (see page 53). Press
this button to access the Channel Guide of the
(CBL), and (SAT/STB) while in (CBL)(SAT/STB)
mode.
INPUTS button
When the remote control is in TV mode, press this
button to access the INPUTS menu. Use the
CURSOR PAD and SELECT button to select the
inputs that are being used. Pressing the INPUTS
button repeatedly will also cycle through the Inputs
menu items. Then press the SELECT button to
select.
Photo Input
IEEE 1394
Air / Cable
Input 1
Input 2
Move SEL Sel.
Select to choose INPUT 1.
Select to choose INPUT 2.
Select to choose INPUT 3.
Select to choose INPUT 4.
Select to choose INPUT 5.
CABLE Select between Cable or Air signal.
digital camera, USB memory or
memory card USB drive connected to
the Photo Input in the side panel of
the Plasma TV (see pages 29-30).
Select to choose the IEEE1394 Input
only for HDX models (see page 31).
Y-PBPR: 3
480i 3:17PM
Input Signal
Format