Dual XGPS160 Owner's Manual page 7

• After approximately 10 seconds, the
XGPS160-xxxxxx
change to blue text and the word
will appear. The blue LED on the XGPS160 will
blink rapidly for a few seconds and then stay
illuminated, confirming the two devices have
successfully paired and are communicating.
Pairing the XGPS160 with an Android device
(NOTE: these instructions were written using An-
droid OS version 4.1 and may be different if you
are using a different version of the Android OS.)
• Turn on the XGPS160. The blue Bluetooth
status light on the XGPS160 will begin to blink
slowly (about once per second).
• On the Android device go to:
Settings->Developer Options
and enable the option for
. This will let the Android device use GPS
tions
information from an external device like the
XGPS160.
• On the Android device go to:
Settings->Wireless & networks
and turn on Bluetooth.
• On the Android device go to
XGPS160
Pairing with your device
name in the device list will
Connected
Allow mock loca-
7