Dell Inspiron 620 Service Manual page 28

1. Follow the instructions in Before You
2. Align and slide the front I/O panel clamps into the front I/O panel clamp slots.
3. Replace the two screws that secure the I/O panel to the front panel.
4. Connect the front I/O panel cables to the system board connectors, AUDIOF1, USBF1, and USBF2 (see
5. Replace the front bezel (see
6. Replace the computer cover (see
7. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
Begin.
Replacing the Front Bezel).
Replacing the Computer Cover).
System Board Components).