Multicast Router Port Settings - Dell PowerConnect 5212 System User's Manual

CLI Commands
The following tables summarize the equivalent CLI commands for items in the Multicast Support/IGMP Member Port Table page.
Command
ip igmp snooping vlan vlan-id static ip-address interface
show mac-address-table multicast [vlan vlan-id] [user | igmp-snooping] Shows the multicast list with MAC and IP addresses
Example
Console(config)#ip igmp snooping vlan 1 static 224.1.2.3 ethernet 1/11
Console(config)#exit
Console#show mac-address-table multicast
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1 224.1.2.3 Eth 1/11 User
Console#

Multicast Router Port Settings

You can use the Multicast Router Port Settings page to display or set ports on the switch that are attached to a neighboring multicast router/switch for each
VLAN ID.
The following options are available:
Usage
Adds a port to a multicast group