CLI Commands
The following table summarizes the equivalent CLI commands for items in the Switch/Configuration web page.
Command
copy file {file | running-config | startup-config | tftp} Uploads/downloads a configuration file to/from the switch's flash memory to a TFTP server
boot system {boot-rom| config | opcode}: filename
boot system {boot-rom| config | opcode}: filename
Example
Console#copy tftp startup-config
TFTP server ip address: 10.1.0.99
Source configuration file name: startup.01
Startup configuration file name [startup]:
/
Console#
Reset
Click Reset to reboot the switch. When prompted, confirm that you want to reset the switch.
Usage
Specifies the file or image used to start up the system
Specifies the file or image used to start up the system