Removing The Keyboard - Dell Inspiron 8200 Manual

Back to Contents Page
Keyboard
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.
1 M2.5 x 20-mm screws (4)

Removing the Keyboard

1. Follow the instructions in "Preparing to Work Inside the
2. Turn the computer over and remove the four M2.5 x 20-mm screws (three labeled "circle K" and one labeled "circle K/M").
3. Turn the computer over and open the display.
NOTICE: Be careful when handling the keyboard. The keycaps are fragile, easily dislodged, and time-consuming to replace.
4. Use a nonmarring plastic scribe under the blank key to pry up the keyboard.
Computer."