Removing The Microprocessor Module - Dell Inspiron 8200 Manual

Hide thumbs Also See for Inspiron 8200:
Table of Contents

Advertisement

Back to Contents Page
Microprocessor Module
Dell™ Inspiron™ 8200
 
NOTICE:
Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.
 

Removing the Microprocessor Module

1.  Follow the instructions in
"Preparing to Work Inside the
2.  Remove the keyboard.
3.  Remove the
hinge
cover.
NOTICE:
To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the microprocessor thermal-cooling assembly. The
oils in your skin reduce the heat transfer capability of the thermal pads.
4.  Remove the
microprocessor thermal-cooling
NOTICE:
When removing the microprocessor module, pull the module straight up. Do not bend the pins.
5.  Remove the microprocessor module.
NOTICE:
To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular to the microprocessor when loosening the cam screw
(see
"Microprocessor Cam
Screw").
Microprocessor Cam Screw (Example)
NOTICE:
Hold the microprocessor down while turning the cam screw to prevent intermittent contact between the cam screw and microprocessor.
 
 
Computer."
assembly.

Advertisement

Table of Contents
loading

Table of Contents