Entering System Setup; System Setup Options; System Setup Screens - Dell Dimension 9100 Service Manual

Back to Contents Page
System Setup
Dell™ Dimension™ 9100 Service Manual
Clearing Forgotten Passwords
Clearing CMOS Settings
Overview
Use system setup as follows:
To change the system configuration information after you add, change, or remove any hardware in your computer
l
To set or change a user-selectable option such as the user password
l
To read the current amount of memory or set the type of hard drive installed
l
Before you use system setup, it is recommended that you write down the system setup screen information for future reference.
NOTICE: Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work
incorrectly.

Entering System Setup

1. Turn on (or restart) your computer.
2. When the blue DELL™ logo is displayed, you must watch for the F2 prompt to appear.
3. Once this F2 prompt appears, press <F2> immediately.
NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must watch for it to display, and then
press <F2>. If you press <F2> before you are prompted, this keystroke will be lost.
4. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then, shut down your
computer and try again.

System Setup Screens

The system setup screen displays current or changeable configuration information for your computer. Information on the screen is divided into three areas: the
options list, active options field, and key functions.
Options List — This field appears on the left side of the system setup window. The field is a scrollable
list containing features that define the configuration of your computer, including installed hardware,
power conservation, and security features.
Scroll up and down the list with the up- and down-arrow keys. As an option is highlighted, the Option
Field displays more information about that option and the option's current and available settings. By
pressing <Enter> or the left and right arrow keys, you can toggle between a primary topic (collapsed)
and subtopics (expanded).

System Setup Options

Option Field — This field contains information
about each option. In this field you can view your
current settings and make changes to your
settings.
Use the right and left arrow keys to highlight an
option. Press <Enter> to make that selection
active.
Key Functions — This field appears below the
Option Field and lists keys and their functions
within the active system setup field.