Table of Contents
Advertisement
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
1. Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI card into the connector until it clicks.
1 Mini PCI card connector
2 Mini PCI card
2. Connect the antenna cable to the Mini PCI card.
NOTE:
To prevent damage to the antenna cable, ensure that the card is not on top of or under the cable.
3. Align the EMI shield retention tabs with the retention-tab slots on the computer base and rotate the front until it lies flat.
4. Replace the four M2.5 x 5-mm screws that secure it to the system board.
1 M2.5 x 5-mm screws (4)
2 shield retention tabs (3)
3 shield-retention tab slots
5. Replace the keyboard.
Advertisement
Table of Contents
