Danfoss TS715 Si Installation & User's Instructions page 17

Programming the ON/OFF Times in 5/2 day
mode
1. Press PROG once until SET ON
TIME appears at the top of the
display and MOTUWETHFR
appears at the bottom of the
display.
Use the + or - buttons to set
the time you would like your
system to fi rst come on in the
morning (Event 1).
2. Press NEXT ON/OFF once
only.
Use the + or - buttons to
set the time you want your
system to go off (Event 2).
To move to the next setting,
i.e. when you would like your
system to come on again
(Event 3) press the NEXT ON/
OFF button again.
3. Continue
system ON and OFF times for
weekday Events 4, 5 & 6 as in
Step 2.
programming
DAY/HOL
DAY/HOL
DAY/HOL
17