Sony PCWA-C700 Operating Instructions Manual page 31

5
Click "Connect".
Connection to the Access Point is established.
If the Access Point has already been configured, the setup procedure is
now complete.
If you want to change the Access Point settings, refer to the manuals of
the Access Point for information on how to proceed. When using the
Sony 5GHz Wireless LAN Access Point PCWA-A500, proceed to step
6.
Note
To use an Access Point to connect to the Internet, you must change the Access Point
default settings.
6
When using the Sony 5GHz Wireless LAN Access Point
PCWA-A500, click the "AP Setting" button on the "Status"
tab of the Wireless Panel.
For information on how to open the Wireless Panel, see page 40. For
information on the "AP Setting" button, see page 44.
Your Web browser starts and displays the Access Point home page
(setup page).
Notes
• If you are using Internet Explorer, any proxy setting will automatically be disabled
for the IP address of the Access Point. When using another browser, make sure
that the browser does not use a proxy server for the Access Point IP address. (The
factory default IP address of the PCWA-A500 is 192.168.11.1.)
31