Sony PCWA-C700 Operating Instructions Manual page 29

4
If Data Encryption (WEP) is enabled for the Access Point,
enter the encryption key (WEP key) in the "Network key"
field.
The key entered here must be exactly the same as that set for the
Access Point. The number of characters depends on the "Key format"
and "Key length" settings (see table below).
Key format
ASCII
Hex
z
Hint
The data encryption (WEP) function serves to prevent unauthorized access to the
network. When the function is enabled, only computers configured with the correct
encryption key (WEP key) can join the network. For security reasons, it is strongly
recommended that you enable this feature. The setting can be made individually for
Access Point Network connection mode and Peer to Peer Network connection mode.
When connecting to an existing network, consult your network administrator
regarding the proper settings. For information on how to control this setting at the
Access Point, refer to the manuals of the Access Point.
When using Service Pack 1
If you have installed Windows XP Service Pack 1, steps 3 and 4 must
be performed as follows.
3
From the "Available Wireless Networks" list in the
"Connect to Wireless Network" dialog box, select the
Access Point to which you want to connect.
Key length Number of characters
40 bits 5 characters
104 bits 13 characters
40 bits 10 characters
104 bits 26 characters
29