Call Screening; Number Of Rings - VTech CS6859 User Manual

Answering system settings

Call screening

Use this feature to choose whether incoming messages can be
heard while they are being recorded.
To turn this feature on or off:
Press MENU when the phone is not in use.
1.
2. Press /CID CID or /
press SELECT.
Press /CID CID or /
3.
press SELECT.
Press SELECT to choose Call screening.
4.
Press /CID CID or /
5.
Screening: Off, then press SELECT to confirm your selection.
You hear a confirmation tone.

Number of rings

You can set the answering system to answer an incoming call
after two, three, four, five or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you
have new messages, or after four rings when you have no new
messages. This enables you to check for new messages and
avoid paying unnecessary long distance charges if you are
calling from outside your local area.
Press MENU when the phone is not in use.
1.
Press /CID CID or /
2.
press SELECT.
Press /CID CID or /
3.
press SELECT.
Press /CID CID or /
4.
Press /CID CID or /
5.
then press SELECT to confirm your selection. You hear a
confirmation tone.
to scroll to Answering sys, then
to scroll to Ans sys setup, then
to choose Screening: On or
to scroll to Answering sys, then
to scroll to Ans sys setup, then
to scroll to # of rings, then press SELECT.
to choose 6, 5, 4, 3, 2 or Toll saver,
51
Ans sys setup
ECO
Cal l screening
ECO
Screening: On
ECO
Ans sys setup
ECO
# of rings
ECO
3
ECO