Answering System Settings; Answering System; Announcement; Record Your Own Announcement - VTech CS6859 User Manual

Answering system settings

Answering system

Use the answering system menu of a cordless handset or the telephone base to
turn on or off the answering system, message alert tone or call screening, set up the
announcement message, or change the number of rings, remote access code or
message recording time.

Announcement

The telephone is preset with a greeting that answers calls with "Hello, please leave a
message after the tone." You can use this preset announcement, or replace it with
your own.

Record your own announcement

Press MENU when the phone is not in use.
1.
Press /CID CID or /
2.
press SELECT.
Press SELECT to choose Announcement. The screen
3.
displays Play [2] Del [3] Rec [7] and the device announces,
"To play, press 2. To record, press 7."
Press 7. The device announces, "Record after the tone.
4.
Press 5 when you are done." and it displays Recording...
Stop [5].
5. After the tone, speak towards the microphone to record your
own announcement.
Press 5 when done. The device plays back the recorded
6.
announcement. Press 5 or CANCEL to stop the playback at
any time.
• Your announcement can be up to 90 seconds in length.
• The system does not record any announcement shorter than
two seconds.
to scroll to Answering sys, then
48
Announcement
ECO
Play Del Rec
[2] [3] [7]
ECO
Recording... Stop
[5]
ECO