Hardware And Mounting Options; Brackets And Clips - Cisco Aironet 1600 Deployment Manual

Hide thumbs Also See for Aironet 1600:
Table of Contents

Advertisement

 
 
Cisco Aironet Access Point Deployment Guide   
 
Hardware and Mounting Options 
 
The AP 1600, 2600, and 3600 have the same mounting options and share similar dimensions, as shown 
in  Figure  14.  There  are  slight  cosmetic  differences;  for  example,  there  are  three  antennas  on  the  AP 
1600. 
 
 
Figure 14: Mechanical Drawing of the AP 2600 and the AP 3600 
 
Brackets and Clips 
 
There  are  many  different  installation  options  available  depending  upon  the  requirements  of  the 
customer.  Brackets  are  available  from  Cisco  as  well  as  third‐party  companies.  When  ordering,  the 
customer  may  choose  either  a  low‐profile  or  a  universal  bracket;  both  are  shown  in  Figure  15.  Each 
bracket is a zero‐dollar ($0) option at the time of configuration.  
 
If the customer does not choose a bracket, the default is the low‐profile AIR‐AP‐BRACKET‐1, which is the 
most  popular  bracket  for  ceiling  installations.  For  the  AP  3600,  Cisco  recommends  using  the  universal 
bracket, part number AIR‐AP‐BRACKET‐2. 
 
Cisco Systems 
Copyright © 2012 Cisco Systems, Inc. All rights reserved. 
Page 13 of 52 
 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aironet 2600Aironet 3600

Table of Contents