Advertisement
REMOVABLE
OVEN DOOR
The oven door can be removed for cleaning.
To remove:
1.
Open the door to the broil stop position (see illustration).
2. Grasp the door at each side and lifl up and off the hinges.
NOTE: When the door Is removed and hinge arms are at
stop positlon, do not bump or try to move the hlnge
arms. The hlnges could snap back causing an injury to
the hands or damage to the porcelain on the front of the
oven. Cover the hinges with toweling or empty towel
rolls while worklng in the oven area.
To replace:
1.
Hold the door over the hinges with the slots at the bottom
edge of the door lined up with the hinges. The hinge arms
must still be in the stop position.
2. Slide the door down onto the hinges as far as it will go and
close the door.
POSITION
REMOVABLE
OVEN RACKS
Be careful not to scratch the oven finish when installing
or removing oven racks.
To install:
1.
Set the raised back edge of the rack on a pair of rack
guides.
2. Push the rack in unlil you reach the bump in the rack
guide, then lift the front of the rack a bit and push the rack
all Ihe way in.
To remove:
1.
Pull the oven rack out, then up.
REPLACING
THE OVEN LIGHT
Be sure that the oven lighl switch is in the off position.
Do not
touch
oven bulb when hot. Do not
touch
oven
bulb. Do not wipe oven light area with wet cloth.
Never touch the electrically live metal collar on the bulb
when replacing it.
Electrical power must be shut off if you have to replace
a broken bulb.
Replace the bulb with a
40
watt appliance bulb. An appliance
bulb is smaller than a standard
40
watt household bulb and
is made to withstand
high oven temperatures
and have a
much longer bulb life.
BULB
, SOCKET
'\
13
EMNT28
Advertisement
