Timer Features - Hitachi GX Series 27GX01B Operating Manual

0335E2new.fm Page 19 Tuesday, April 25, 2000 4:10 PM

Timer Features

Clock Set
Clock (when set) will display onscreen at initial "Turn On",
after a channel change and when pressing the RECALL
button. The time must be set first in order to operate the
Event Program Timer.
MENU
1. Press .
2. Press CURSOR or
Set-Up icon.
MENU
3. Press to display the Set-Up menu.
CLOCK
TIME
CLOCK SET
DAY
SLEEP
TIMER1
TIMER2
4. Press CURSOR or
accordingly).
5. Press CURSOR to select minutes position.
6. Press CURSOR or
MENU
7. Press twice to exit menus.
Sleep Timer
This feature is used for automatic turn off in 30, 60 or 90
minutes. Display will flash 3, 2 and 1 to indicate the last
three remaining minutes prior to turn off. The recall display
will also appear.
MENU
1. Press .
2. Press CURSOR or
Timer icon.
MENU
3. Press to display the CLOCK menu.
CLOCK
CLOCK SET
HOW LONG?
SLEEP
TIMER1
TIMER2
4. Press CURSOR to highlight to SLEEP.
Menu Selections
and or to highlight the
- - : - -
- - -
to set hours (Set AM/PM
repeatedly to set minutes.
and or to highlight the
K
NO
- 19 -
5. Press CURSOR , to select NO, 30, 60 or 90 minutes
(Sleep timer will be activated).
MENU
6. Press twice to exit menus.
NOTE: To deactivate Sleep TImer repeat steps 1 through
5. In step 5 select "NO" instead of minutes.
Note:
Press the RECALL button to display the remaining minutes for
Sleep Timer, the status will display in the bottom left corner.
Timer 1 and Timer 2
In TIMER menu, select one or both timers to turn the
television on and off at selected times, on selected
channels, and on selected days.
Note: TIME must be entered in CLOCK SET to operate
TIMER features
MENU
1. Press .
2. Press CURSOR or
Timer icon.
MENU
3. Press to display the CLOCK menu.
CLOCK
DAY
CLOCK SET
ON
SLEEP
OFF
TIMER1
ENTER CHANNEL
TIMER2
SET
SET TIME FIRST
4. Press CURSOR to highlight TIMER 1 or TIMER 2.
5. Press CURSOR to set day or days.
6. Press CURSOR to highlight ON (time).
7. Press CURSOR or
AM or PM accordingly).
8. Press CURSOR to highlight the minutes position.
9. Press CURSOR or repeatedly to set minutes.
10. Press CURSOR to highlight OFF (time).
11. Repeat steps 7 through 9 for setting OFF (time).
12. Press CURSOR to highlight ENTER CHANNEL.
13. Press CURSOR or
Keypad to enter the channel number desired when the
set turns "ON".
14. Press CURSOR to highlight SET.
15. Press CURSOR to select:
• NO - not activated
• YES- activated
MENU
16. Press twice to exit menus.
and or to highlight the
K
MON-FRI
- - : - -
- - : - -
- - -
K
NO
repeatedly to set hours (Set
or use the remote control