Timer Features
number when changing channels or pressing RECALL.
1. Press
.
2. Press CURSOR
3. Press
to display the Channel I.D. Menu.
4. Press CURSOR
number you wish to assign a Channel Identifier.
5. Press CURSOR
6. Press CURSOR
cursor
to move cursor to the second position and repeat until the complete Channel
Identifier is entered (up to 4 characters).
7. Press CURSOR
through 6 to continue adding Channel Identifier(s).
8. Press
twice to exit menus.
NOTE: To delete a Channel I.D. (Station Identifier) from memory all four characters
positions in the "ENTER I.D." area must display a dash mark (-).
NOTE:
When the Maximum amount of channel identifiers are entered, "FULL" will be display in
the caption position.
Timer Features
Sleep Timer
This feature is used for automatic turn off in 30, 60, 90 minutes. Display will flash 3, 2, and 1 to
indicate the last three remaining minutes prior to turn off. The recall display will also appear.
or
and
or
to highlight the Channel I.D. Icon.
or
, or use the Remote Control Keypad to enter the channel
to highlight ENTER I.D.
or
to select first character in Channel Identifier. Then press
or
to highlight ENTER CHANNEL NUMBER. Then repeat steps 4
- 22 -