Hitachi 32UDX10S, 36UDX10S Operating Manual page 54

VIDEO
Select VIDEO to adjust picture settings and improve picture quality.
VIDEO
THUMB
STICK
Use the THUMB STICK or
Press the THUMB STICK
Press EXIT to quit menu.
NOTE: If CONTRAST is selected, you are adjusting CONTRAST. The additional menu items BRIGHTNESS, COLOR, TINT,
and SHARPNESS can be selected and adjusted in the same manner.
Use this function to change the contrast between black and white levels in the picture.
CONTRAST
BRIGHTNESS Use this function to adjust overall picture brightness.
COLOR Use this function to adjust the level of color in the picture.
Use this function to adjust flesh tones so they appear natural.
TINT
SHARPNESS Use this function to adjust the amount of fine detail in the picture.
RESET When RESET is selected, press down on THUMB STICK to return video adjustments to factory preset
conditions.
1. It may be necessary to adjust TINT to obtain optimum picture quality when using the COMPONENT VIDEO Y-P B P R
NOTE:
input jack.
2. If you are using the COMPONENT VIDEO input jack (Y-P B P R ) and notice that the TINT and COLOR are abnormal,
check to make sure that COMPONENT SET - COLOR SYSTEM is set properly. (see page 44)
SETUP CUSTOMIZE VIDEO
1. CONT RAS T
2. B RIGHTNE S S
3. COL OR
4. T INT
5. S HA RPNE S S
6. RE S ET
7. A DV ANCE D
S E T TINGS
M E N U T O M E N U B A R T O Q U I T
to highlight the function to be adjusted.
or to adjust the function.
AUDIO THEATER
THUMB
100%
STICK
50%
50%
50%
E X I T
54
C O N TR A S T
M E N U T O M E N U B A R T O Q U I T
VIDEO
100%
E X I T