Equinox Systems ESP-2 Product Installation Manual page 18

Creating AIX ESP Installation Diskettes on Windows
1. Load the Equinox SuperSerial Software CD.
• If you have autoplay enabled, the Equinox SuperSerial Software Installation screen
will appear.
• If you do not have autoplay enabled, set your default drive to D: and run the com-
mand
D:\SETUP,
2. Click UNIX on the Main Window.
3. Select the UNIX operating system for which you need drivers. Follow the on-screen
instructions for creating an installation diskette.
4. Once the AIX installation diskette is created, refer to the following fi les for detailed
installation instructions:
/drivers/esp/aix43/readme.txt
/drivers/esp/aix51/readme.txt
16
Equinox ESP-2 MI Serial Hub Product Installation Guide
where D: is your CD-ROM drive letter.