Table of Contents
Advertisement
group Subcommand
Syntax
group {PhyPG [Short|Long] [[parity-group-id]:[parity-group-id]][ ...]|
Description
The group subcommand specifies the type of monitoring data that you want
to export. This command uses an operand (such as PhyPG and PhyLDEV
above) to specify a type of monitoring data.
Table 7-23 shows the monitoring data that can be saved into files by each
operand, and the saved ZIP files. For details on the monitoring data saved in
these files, refer to the tables indicated in the See column.
Table 7-23
Operand
PhyPG
PhyLDEV
Hitachi Universal Storage Platform V/VM Hitachi Performance Manager User's Guide
PhyLDEV [Short|Long] [[parity-group-id]:[parity-group-id]][ ...]|
PhyExG [[exg-id]:[exg-id]][ ...]|
PhyExLDEV [[exg-id]:[exg-id]][ ...]|
PhyProc [Short|Long]|
PhyCSW [Short|Long]|
PG [[parity-group-id|V-VOL-group-id|exg-id]:
[parity-group-id|V-VOL-group-id |exg-id]][ ...]|
LDEV [[parity-group-id|V-VOL-group-id|exg-id]:
[parity-group-id|V-VOL-group-id|exg-id]][ ...]|
Port [[port-name]:[port-name]][ ...]|
PortWWN [[port-name]:[port-name]][ ...]|
LU [[port-name.host-group-id]:[port-name.host-group-id]][ ...]|
PPCG [[SPM-group-name]:[SPM-group-name]][ ...]|
PPCGWWN [[SPM-group-name]:[SPM-group-name]][ ...]|
RemoteCopy |
RCLU [[port-name.host-group-id]:[port-name.host-group-id]][ ...]|
RCLDEV [[CU-id]:[CU-id]][ ...]|
RCCLPR |
UniversalReplicator |
URJNL [[JNL-group-id]:[JNL-group-id]][ ...]|
URLU [[port-name.host-group-id]:[port-name.host-group-id]][ ...]|
URLDEV [[CU-id]:[CU-id]][ ...]
}
Operands of the group Subcommand and Saved Monitoring
Data
Window of
Performance
Monitor
Physical tab in
the
Performance
Management
Using the Export Tool
Monitoring Data Saved in
the File
Usage statistics about parity
groups
Usage statistics about
volumes
Saved ZIP File
PhyPG_dat.ZIP (*1)
Table 7-2
PhyLDEV_dat.ZIP
(*1)
See
7-37
Advertisement
Table of Contents
