Table of Contents
Advertisement
4. Select IOPS or MB/s from the All Thresholds list, and do one of the
following:
– To specify the threshold value by using the I/O rate, select IOPS from
the list below the check box.
– To specify the threshold value by using the transfer rate, select MB/s
from the list below the check box.
Even if the types of rates differ between the upper limit values and the
threshold value, the threshold control is effective for all the non-prioritized
WWNs.
5. Enter the threshold in the text box of All Thresholds.
6. Click Apply.
The settings in the window are applied to the storage system.
Changing the SPM Name of a Host Bus Adapter
The Server Priority Manager window allows you to assign an SPM name to a
host bus adapter (HBA). Although you can identify HBAs by WWNs (Worldwide
Names), you will be able to identify HBAs more easily if you assign SPM
names. WWNs are 16-digit hexadecimal numbers and cannot be changed.
However, SPM names should not necessarily be 16-digit hexadecimal numbers
and can be changed.
The following is the procedure for changing an already assigned SPM name.
For details on how to assign an SPM name, see Monitoring All Traffic between
HBAs and Ports.
To change an SPM name:
1. Start Server Priority Manager.
The Server Priority Manager window is displayed.
2. Ensure that the WWN tab is displayed.
3. In the upper-left tree, select a host bus adapter (
and then right-click the selection.
4. From the pop-up menu, select Change WWN and SPM Name.
The Change WWN and SPM Name window is displayed.
5. Enter a new SPM name in the SPM Name box and then select OK. You can
use up to 16 characters for an SPM name.
6. In the Server Priority Manager window, click Apply.
The settings in the window are applied to the storage system.
6-26
Hitachi Universal Storage Platform V/VM Hitachi Performance Manager User's Guide
Server Priority Manager Operation
) from below Monitor
Advertisement
Table of Contents
