Suspensions
Soap-based lithium grease with NLGI 3; ISO-L-
XBCHA3, DIN K3K-20
Refitting the front wheel
- To refit, carry out the removal operations but in reverse order and comply with the specified locking
torque.
Locking torques (N*m)
Wheel fixing screw 20 ÷ 25 Wheel axle nut 74 ÷ 88
Steering column
Removal
- Remove the front wheel
- Remove the brake calliper
- Loosen the screw fixing the odometer cable plate
and take out the cable.
- Remove the suspension arm housing by un-
screwing the three screws indicated in the photo-
graph.
SUSP - 4
Vespa GTV 250 i.e.