Hitachi VM-E625LA Instruction Manual page 50

General Maintenance
Auto-focus does not operate.
The created title does not appear
The LCD monitor does not turn on.
The optional DC camera light cannot
be used.
RECORDING TV PROGRAMS OFF THE AIR
Symptom
The camcorder cannot be set to the
recording mode, even when the
Start/Stop button on the camcorder is
pressed
PLAYBACK OF PRE-RECORDED CASSETTE
Symptom
"PLAY" button cannot be engaged.
No picture appears on television
screen when "PLAY" is pressed. . (TV
is connected to the camcorder by using
RF output adapter.)
Interference on playback picture. (TV is
connected to the camcorder by using
output adapter.)
§ Auto-Focus does not operate if a
special-effects filter is attached or
the objects shown on page 35 are
being recorded.
§ Insert the clock battery, then create
a title.
§ Do not remove the clock battery
after creating a title.
§ It does not turn on when alkaline
batteries are used to power the
camcorder. Use another power
supply
§ The LCD monitor cannot be
powered through the DC cord while
alkaline batteries are left in the
camcorder. First remove the
batteries, and then connect the DC
cord to power the camcorder.
§ When you are viewing the picture
on the LCD monitor the DC camera
light cannot be used.
Check Point & Correction
§ Check the record-protect tab on the
cassette. See page 19 for details.
§ Set the CAM/OFF/VIDEO switch to
CAM.
§ Connect the camcorder and TV or
VCR.
Check Point & Correction
§ Set the CAM/OFF/VIDEO switch to
VIDEO
§ Set the television to the camcorder
channel (3 or 4) depending upon
the selected channel in the RF
channel select switch of RF output
adapter.
§ When you see the playback picture
on your TV, RF adjust fine tuning
knob on television set to obtain best
picture
- 50 -