General Maintenance
TAPE DISPLAY
Symptom
TAPE appears in the viewfinder
Specifications
General Specifications
Power requirements
Power consumption
Dimensions
Weight
Operating temperature
Storage temperature
Video Recorder Specifications
Format
Record/playback
Video signal
Tape speed
Video input
Video output
Audio input
Audio output
Fast forward/rewind time
Camera Specifications
Scanning
Required minimum illumination 1 lux
Pickup device
Lens diameter
For U.S.A. only
HITACHI
Service Hotline
To locate an authorized
HITACHI service facility
Check Point & Correction
§ Have you moved the camcorder or
cassette from a cold place to a
warm place so that its temperature
changed abruptly?
§ If the temperature has changed,
remove the cassette and set the
CAM/OFF/VIDEO switch to OFF,
then wait for about one hour.
§ Remove the cassette and then try to
reinsert: remove it several times.
§ If the indication is still shown in the
viewfinder, use a cleaning tape to
clean the heads and replace the
cassette.
6V DC
5.1W (when recording/LCD monitor OFF)
7.3W (when recording/LCD monitor ON)
4-5/8" W x 4-3/4" H x 8-5/16" D (118mm x 120mm x 211mm)
2.31 lbs (approx. 1050g) without battery pack, lens
lens cap or cassette
32°F ~ 104°F (0°C ~ 40°C)
-4°F ~ 140°F (-20°C ~ 60°C)
8mm
Two video record/playback heads
EIA standard NTSC color
14.3mm/sec
1.0Vp-p, 75 ohm
1.0Vp-p, 75 ohm
-7.8dBs (316mVrms)
-7.8dBs (316mVrms)
Less than 8 minutes with P6-120 cassette
525 lines/60 fields/30 frames
1/4" C.C.D.
46mm
- 52 -