Troubleshooting - Tanita UM-028F Instruction Manual

Body fat moitor / scale
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING

If the following problems occur... then...
• A wrong weight format appears followed by kg, lb, or st-lb
Refer to "SWITCHING THE WEIGHT MODE" on p.4.
• "Lo" appears on the display, or all the data appears and immediately disap-
pears.
Batteries are low. When this message appears, be sure to replace the batteries immediately, since weak batteries will affect the
accuracy of your measurements. Change all the batteries at the same time with new AA-size batteries.
Note: Your settings will not be erased from the memory when you remove the batteries.
• "Error" appears while measuring.
Please stand on the platform keeping movement to a minimum.
The unit cannot accurately measure your weight if it detects movement.
• The Body Fat Percentage reading does not appear or "-----" appears after the
weight is measured.
Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned with the guides on the
measuring platform.
• "OL" appears while measuring.
Reading cannot be obtained if the weight capacity is exceeded.
• "Error%" appears while measuring.
The Body Fat Percentage is more than 75%, readings cannot be obtained from the unit.
Specifications
Weight Capacity
300 lb (136 kg ) (21 st 6 lb)
Weight Increments
0.2 lb (0.1 kg) (0.2 lb)
Body Fat Increments
1%
Personal Data
2 memories
Power Supply
4 AA batteries (included)
Power Consumption
60 mA maximum
Measuring Current
50 kHz, 500 µA
Notice:
These marks can be found out on contaminant-containing
Batteries: Pb Pb = Battery contains lead,
Cd Cd = Battery contains cadmium,
Hg Hg = Battery contains mercury.
Not allowed to mix batteries with consumer
wastes!
As consumer you are legally bound to return used or discharged batteries.
You can deposit your old batteries at the public collecting points in your
town, or wherever the corresponding batteries are sold and specifically
marked collecting boxes have been set up. In case of scrapping the
apparatus, the batteries should be removed from it and deposited at the
collecting points as well.
The device features radio interference suppression in
compliance with EC regulation 2004/108/EC
Eng
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents